REQUEST FOR PROPOSAL CONSTRUCTION MANAGEMENT AND INSPECTION (AS-AGENT) FOR FEMA DR-4339 EXISTING INDUSTRIAL BUILDINGS AND PARKS REPAIRS AT MULTIPLE PRIDCO BUILDINGS AND PARKS, ISLAND WIDE, PR
September 30, 2021
RE: Request for Proposal (RFP)
Construction Management and Inspection Services (As Agent) for
FEMA DR-4339 Existing Industrial Buildings and Parks Repairs
At Multiple PRIDCO Buildings and Parks,
Island wide, PR
The Puerto Rico Industrial Development Company (PRIDCO) here by invites your firm to submit a proposal for the Construction Management Services (As Agent) for the Planning-Assessment-Design-Permitting-Bid (all five previously mentioned, are defined as Pre-construction) and Repairs and Construction of multiple PRIDCO properties island wide.
Attached is the RFP describing the project, requirements of the proposal, the services sought and criteria that will be used to evaluate received proposals.
Please deliver two (2) copies and one unbound original of your proposal and a digital copy via USB or CD, to PRIDCO offices, Suite 303, no later than 4:00 PM, Thursday, November 4, 2021. PRIDCO offices are located at 355 F.D. Roosevelt Ave., Hato Rey. Note that this deadline is firm, and late submittals will not be accepted.
We look forward to receiving a proposal from your firm. If you have any questions regarding this project, please contact Eng. Santiago R. García Meléndez, P.E. at firstname.lastname@example.org.
Javier J. Bayón Torres
SECTION 1 - GENERAL NATURE OF SERVICES
The Puerto Rico Industrial Development Company (PRIDCO) is soliciting Construction Management and Inspection firms (Proponent) with expertise in appropriate hazard mitigation program (HMP), industrial buildings design, repairs and construction, and permitting for multiple PRIDCO Industrial properties located Island wide in Puerto Rico (hereinafter “the Project”).
The selection process shall include review of proposals for the Project by the PRIDCO Selection Committee.
The selected Proponent(s) [Construction Management and Inspection Services as Agent (CM-AGENT)] must have the ability to provide the full-range of services or to team with consultant or sub consultants necessary to complete the phases of Planning, Existing Conditions and HMP Assessments, Design, and Permitting Phase (hereinafter “Pre-Construction”), Bids, Substantial, Completion, Final Completion and Closeout of the Projects, including but not limiting to: roof impermeabilization, windows, interior and exterior doors, frontal and perimeter fences, interior and exterior painting, lighting, exhaust fans, among others.
The CM-AGENT will be responsible for ensuring that their developed and approved master schedule is executed accordingly, including milestones and projects’ budget.
OPEN INVITATION TO SUBMIT A PROPOSAL FOR THE AFOREMENTIONED SERVICES
Point of Contact to submit proposals:
Santiago R. García Meléndez, PE
PRIDCO’s Executive Director Office
Physical address to submit sealed proposals:
PRIDCO’s Property Management Office
Office 303; 355 FD Roosevelt Avenue
Hato Rey, PR 00918
Due Date: THURSDAY, NOVEMBER 4, 2021, AT 4:00 PM.
Proposals general requirements:
PRIDCO will only accept proposal that are presented in a timely manner during the term herein conceded and comply with the following general requirements:
- Proposal shall be presented in two separate sealed envelopes: one will contain the financial proposal, and the other will contain the professional service proposals.
- Each Sealed Proposal Envelope shall properly identify proponents name, address, project and region for which proposal is submitted.
- Each proposal shall be signed by the identified and authorized representative, dated and submitted as correct and binding.
- Proposals shall contain 1 original and 2 copies, and a digital copy via USB or CD.
PRIDCO’s multiple industrial parks and buildings (“the properties”) were developed since 1950’s and have been used over the years as an asset for industrials who may rent industrial properties under a discounted rent fee with the objective of promoting Puerto Rico’s Industrial development and sustainability. The properties are identified in PRIDCO’s files hereto attached as Exhibit A. Properties vary from structures, buildings, streets, and diverse infrastructure.
The Hurricane María, identified by FEMA as Event DR-4339, impacted the island of Puerto Rico, producing heavy rains, high winds and wind-borne debris, causing severe damages to the properties, leading FEMA and PRIDCO to grant and receive federal emergency funds to repair approximately 400 industrial properties (See Exhibit B).
The properties and their associated infrastructure have been identified as necessary to maintain commerce and support the growth of the economy in Puerto Rico. It’s for said reason, that PRIDCO has been granted federal funds to lead the task of repairing the properties and bringing them to compliance with federal standards and conditions, as prior to the Hurricane María considering the Hazard Mitigation Plan (hereinafter, HMP), and a design with a resilient approach.
Due to the time constrain and high importance of PRIDCO’s properties and their impact on the economy, Proponent’s attention to schedules and due dates will be considered and have a high impact during the evaluation. Proposals shall evidence knowledge and capability to meet all applicable federal and local related codes and regulations.
Regions to be serviced as result of the services requested through this RFP, are herein attached as Exhibit C. PRIDCO will provide access to building drawings and all other necessary and related documents to facilitate the professional services requested. All as deemed necessary and complying with the confidentiality requirements set along the RFP.
1.3 SCOPE OF SERVICES:
PRIDCO is formally requesting proposals for the Construction Management and Inspection for the repairment of the properties, as defined above, under the HMP approved by FEMA, after damages caused by Hurricane María.
The contract for the CM-AGENT services will include four phases with a single contract. The phases and estimate duration are described as follow:
- Pre-Construction (3 to 6 months per Region)
- Bid and Awarding (12 to 24 months per Region)
- Construction/Repairs and Closeout (24 to 30 months per Region)
- Procurement (if necessary – 1 to 2 months per Project)
- Construction/Repairs (1 to 3 months per Project)
- Final Completion (1 month per Project)
- Closeout (2 months per Region/Project)
This request includes services related to Construction Management for the Existing Conditions Assessment, HMP, Design, and Permitting for the repairs of multiple properties, industrial buildings and parks, that include but is not limited to: roof impermeabilization, windows, interior and exterior doors, frontal and perimeter fences, interior and exterior painting, lighting, exhaust fans, among others, probable cost opinion, and technical advisory services at multiple properties island wide (hereinafter, the Project). The design and construction of the Project shall abide by all applicable and related local and federal Acts, Codes and Regulations, and also the Grants requirements.
Acceptable Proponents shall possess knowledge of FEMA Regulation 428 (Public Assistance Alternative Procedures Guide for Permanent Work), FEMA Hazard Mitigation Grants 404 and 406; and other applicable regulations.
The Proponent shall furnish the following items, required to provide the construction inspection service, without direct reimbursement by PRIDCO: computer(s), printer(s), computer software, copy machine, all inspection equipment, cellular phones, personal protective equipment, vehicles, and insurances.
It is anticipated that, during the repair’s projects, the contractor will not provide, within its temporary facilities, office space for the inspector.
The Proponent shall maintain at the main office, on a current basis; a record copy of all contracts, drawings, specifications, addenda, change orders and other modifications, in good order and marked to record all changes made during construction; shop drawings, product data; samples; submittal; purchases; materials; equipment; applicable handbooks; maintenance and operating manuals and instructions; other related documents and revisions which are relevant to the Project. Also maintain files for all correspondence, reports, meeting minutes, test reports, certifications, RFI’s, disposal receipts, certification of payments, and other relevant documentation. The Proponent shall also strictly coordinate with PRIDCO the document control requirements by COR3 and FEMA.
SECTION 2 - CONSTRUCTION MANAGEMENT AND INSPECTION SERVICES TO BE PROVIDED (Shall include, but may not be limited to):
2.1 PHASE ONE – Pre-Construction Phase
2.1.1 Assist PRIDCO and/or its Consultant or sub consultant in developing and implementing a Master Schedule.
2.1.2 Construction Management Plan: The CM-AGENT shall adopt the existing Project Master Plan to prepare a Construction Management Plan and shall make recommendations to the plan throughout the duration of the Project, as may be appropriate. In preparing the Construction Management Plan, the CM-AGENT shall consider PRIDCO's schedule, budget and general scope and design requirements for the Project. The CM-AGENT shall then develop various alternatives for the scheduling and management of the Project and shall make recommendations to PRIDCO.
2.1.3 Pre-Construction Services: The Proponent will monitor and manage the services as describe in Exhibit A, of the Design Consultant, for Proponents assigned Region (RFP for Hazard Mitigation Program, Design & Permitting Services).
2.1.4 Status Reports: Provide weekly status reports to PRIDCO in written and dashboard format. The CM-AGENT shall include example of these reports for PRIDCO’s approval. This report shall include, but its not limited to, stage of each work performed, percent of completion for each work performed, any outstanding documents that need attention, budget relation, milestone achieved, percent of work completed in relation to whole worked assigned, time schedule left, any new findings or new issues that need be addressed.
2.1.5 Bid Process: The CM-AGENT must comply with ASG Regulation 9320 (Reglamento Uniforme de Compras y Subastas de Bienes, Obras y Servicios No Profesionales de la Administración de Servicios Generales del Gobierno de Puerto Rico) (See Exhibit F). Some of the relevant Chapter and Sections are; Chapter 7 - Metodos de Licitacion, Chapter 9 – Bonds and Article 10.5 – General Conditions.
2.1.6 Constructability Review: The CM-AGENT will perform a complete constructability review of the project bid documents, specifications, plans and estimates prior to bidding the projects and identify potential problems that need correction before the projects are bid.
2.1.7 Project and Construction Budget: Based on the Construction Management Plan: The CM-AGENT shall prepare a Project and Construction Budget based on the separate divisions of the Work required for the Project and shall identify contingencies for the Pre-Construction and Construction phases. The CM-AGENT shall review the budget with PRIDCO and the Designer Contractor, and the CM-AGENT shall submit the Project and Construction Budget to PRIDCO’s acceptance. The Project and Construction Budget shall be revised by the CM-AGENT as directed by PRIDCO.
2.1.8 In coordination with the Design Consultant, Proponent will coordinate and work all permitting requirements within PRIDCO, pertinent local and Federal Agencies with jurisdiction over the works performed, COR3 and FEMA (if necessary).
2.1.9 Revisions to the Construction Management Plan: During the Pre-Construction Phase the CM-AGENT shall make recommendations to PRIDCO regarding revisions to the Construction Management Plan. The Construction Management Plan shall include a description of the various bid packages recommended for the Project. Revisions approved by PRIDCO shall be incorporated into the Construction Management Plan.
2.1.10 Progress Meetings: The CM-AGENT shall conduct weekly progress meetings attended by PRIDCO, Designer and others. Such meetings shall serve as a forum for the exchange of information concerning the Project and the review of Pre-Construction progress. The CM-AGENT shall prepare and distribute minutes of these meetings to the participants, and others as necessary.
2.1.11 Review of Design Documents: The CM-AGENT shall review the Pre-Construction documents and make recommendations to PRIDCO and Designer as to FEMA/COR3 compliance, constructability, scheduling, and time of construction; as to clarity, consistency, and coordination of documentation among Contractors.
2.1.12 Cost Control: The CM-AGENT shall prepare an estimate of the construction cost for each submittal of the properties’ existing conditions and HMP assessments, project drawings and specifications from the Designer. This estimate shall include a contingency acceptable to PRIDCO, CM-AGENT and Designer for construction costs appropriate for the type and location of the Project and the extent to which the design has progressed. The cost estimate shall be prepared in the latest CSI/CSC MasterFormat 2004/2010. The cost estimate should be detailed and itemized, not based on a lump sum.
2.1.13 Project and Construction Budget Revision: The CM-AGENT shall make recommendations to PRIDCO concerning revisions to the Project and Construction Budget that may result from design changes.
2.1.14 Value Engineering Studies: The CM-AGENT shall provide value engineering recommendations to PRIDCO and Designer on major construction components, including cost evaluations of alternative materials and systems, if required.
2.1.15 Design Phase Change Report: The CM-AGENT shall prepare and distribute Design Phase change reports that shall list all PRIDCO-approved changes as of the date of the report and shall state the effect of the changes on the Project and Construction Budget and the Master Schedule.
2.1.16 Approvals by Regulatory Agencies: The CM-AGENT shall coordinate transmittal of documents to regulatory agencies and utility providers for review and shall advise PRIDCO of potential problems resulting from such reviews and suggested solutions regarding completion of such reviews.
2.1.17 Relevant Agencies Documentation: The CM-AGENT shall verify that all Projects are in full compliance with FEMA’s documentations such as:
22.214.171.124 DDD – Damage Description and Dimensions
126.96.36.199 Lead and Asbestos Checklist
188.8.131.52 HMP Scope and Subgrant Conditions
184.108.40.206 EHP – Environmental Historical Preservation
220.127.116.11 REC – Record of Environmental Consideration
18.104.22.168 Other Federal and States Agencies requirements.
2.2 PHASE TWO: Contractor(s) participation and obligations in the Bidding and Awarding Process
2.2.1 Status Reports: Provide weekly status reports to PRIDCO in written and dashboard format. The CM-AGENT shall include example of these reports for PRIDCO’s approval. This report shall include, but its not limited to, stage of each work performed, percent of completion for each work performed, any outstanding documents that need attention, budget relation, milestone achieved, percent of work completed in relation to whole worked assigned, time schedule left, any new findings or new issues that need be addressed.
2.2.2 Progress Meetings: The CM-AGENT shall conduct weekly progress meetings attended by PRIDCO, Designer and others. Such meetings shall serve as a forum for the exchange of information concerning the Project and the review of Bidding and Awarding progress. The CM-AGENT shall prepare and distribute minutes of these meetings to the participants, and others as necessary.
2.2.3 Bidder's Qualifications: The CM-AGENT shall coordinate and follow the procedure of the General Services Administration (GSA) (known in Spanish as ASG - Administración de Servicios Generales) for the Bid Process. For the ASG Regulation 9320, see Exhibit F. Bidders shall be registered under the RUL (Registro de Licitadores).
2.2.4 Notices and Advertisements: The CM-AGENT shall assist PRIDCO in monitoring ASG during the preparation and placing of notices and invitation to submit bids for the Project. The CM-AGENT shall also monitor and track the Projects bid’s notices and advertisements thru the ASG’s RUS platform (“Registro de Unico de Subastas”) and Acquisition Reform.
2.2.5 Delivery of Bid Documents: The CM-AGENT shall prepare and expedite the Bid Documents Draft to ASG and follow up until Final approval. The CM-AGENT shall obtain the supporting documents from the Designer and PRIDCO, and assist ASG (if necessary) for printing, binding, wrapping and service the bidders. The CM-AGENT shall maintain a list of bidders receiving Bid Documents in coordination with ASG and PRIDCO.
2.2.6 Pre-Bid, Site Visit, and Bid Attendance: The CM-AGENT shall attend the Pre-Bid, Site Visit, and Bid Opening, as PRIDCO’s representative in the ASG, as needed.
2.2.7 Pre-Bid Virtual and Site Visit Conferences: In conjunction with ASG, PRIDCO, Designer and Tenants (in case of the property been leased), the CM-AGENT shall conduct pre-bid virtual and site visit conferences in coordination with ASG and PRIDCO.
2.2.8 Information to Bidders: The CM-AGENT shall develop and coordinate procedures to provide answers to bidder's question in coordination with ASG, Designer and PRIDCO. All answers shall be in the form of addenda following ASG procedures.
2.2.9 Addenda: The CM-AGENT shall receive from the Designer a copy of all addenda. The CM-AGENT shall review addenda for constructability, for effect on the Project and Construction Budget, scheduling and time of construction, and for consistency with the related provisions as documented in the Bid Documents. The CM-AGENT shall distribute a copy of all addenda to each bidder receiving Bid Documents following ASG procedures.
2.2.10 Bid Opening and Recommendations: The CM-AGENT shall assist ASG and PRIDCO in the bid opening and shall evaluate the bids for responsiveness, qualifications and price. The CM-AGENT shall make recommendations to PRIDCO concerning the acceptance or rejection of bids.
2.2.11 Analyzing Bids: Upon receipt of the bids, the CM-AGENT shall evaluate the bids, including alternate bid prices and unit prices, and shall assess PRIDCO regarding the award of the Construction Contract. CM-AGENT may require to submit a written report with any findings and recommendations.
2.2.12 Construction Contracts: The CM-AGENT shall assist PRIDCO in the assembly, delivery and execution of the Contract Documents. ASG shall issue the Notice of Award. The CM-AGENT shall issue to the Contractor(s) on behalf of PRIDCO the Notice to Proceed, with PRIDCO’s approval.
2.3 PHASE THREE: Construction/Repairs Management, and Inspection Process
2.3.1 Schedule and chair a kickoff meeting with PRIDCO to discuss the proposed work plan and special concerns to be presented at the pre-construction meeting(s). It is envisioned the pre-construction meeting will include all interested parties, including utilities, sub-contractors, etc.
2.3.2 Provide a pre-construction agenda to PRIDCO for acceptance, schedule a preconstruction meeting and notify attendees.
2.3.3 Provide coordination of project activities and prepare reports and documents, as necessary, PRIDCO review and action.
2.3.4 Maintain at main CM-AGENT office, on a current basis; a record copy of all contracts, drawings, specifications, addenda, change orders and other modifications, in good order and marked to record all changes made during construction; shop drawings, product data; samples; submittal; purchases; materials; equipment; applicable handbooks; maintenance and operating manuals and instructions; other related documents and revisions which are relevant to the contract work. Also maintain files for all correspondence, reports, meeting minutes, test reports, certifications, RFI’s, disposal receipts, certification of payments, and other relevant documentation.
2.3.5 Provide weekly status reports to PRIDCO in written and dashboard format. The CM-AGENT shall include example of these reports for PRIDCO’s approval. This report shall include, but its not limited to, stage of each work performed, percent of completion for each work performed, any outstanding documents that need attention, budget relation, milestone achieved, percent of work completed in relation to whole worked assigned, time schedule left, any new findings or new issues that need be addressed.
2.3.6 Review laboratory, shop and mill test reports of materials and equipment (if apply), and coordinate as required with the Project Design Team, and in compliance with PRIDCO/FEMA requirements.
2.3.7 Prepare and send a Weekly Statement of Working Days to the Contractor.
2.3.8 Monitor Contractor and Sub-Contractors certified payroll, in compliance with the Davis-Bacon Act (See Exhibit E).
2.3.9 Administer the construction contract in conformance with the requirements set forth in the Plans and Specifications.
2.3.10 Attend and conduct weekly construction progress meetings with PRIDCO, Design Team, Contractor(s), affected outside Agencies, general public, other consultants, etc. to discuss matters such as procedures, progress, problems, and scheduling. Prepare and distribute meeting agenda and minutes.
2.3.11 Project meetings will review safety, contract progress, contract schedule, manpower utilization, submittals, permits, material problems, open requests for information (RFI’s), Contractor problems, quality control, change orders, project status and other related issues.
2.3.12 Monitor and inspected all Construction/Repairs activities.
2.3.13 Review and process all shop drawings, project data, samples, and other submittals. Establish and implement procedures for expediting the processing and approval.
2.3.14 Coordinate submittals review with Design Team.
2.3.15 Coordinate with PRIDCO’s Departments.
2.3.16 Document all claims and maintain for account records.
2.3.17 Monitor and document construction surveying, if necessary.
2.3.18 Coordinate testing requirements and scheduling of material testing, if specified by Designer.
2.3.19 Schedule Control: Review and analyze the Contractor's schedule (monthly) including activity sequences and duration, schedule of submittal and schedule of delivery for products with long lead time. Work with Contractor(s) to maintain the project schedule to show current conditions and suggest revisions as required. Develop monthly reports on progress and percent complete.
2.3.20 Recommend necessary or desirable changes in the Construction Contractor'(s) scope of work, in coordination with PRIDCO. Review and evaluate Contractor'(s) request for changes. Negotiate with Contractor and submit recommendations to PRIDCO supported by field data related to any additional work. If change orders are accepted by PRIDCO, prepare change orders for signature and authorization by PRIDCO. Maintain a log of change requests.
2.3.21 Create and maintain "As-Built" project schedule.
2.3.22 Monitor and coordinate with Contractor(s) and Designer "As-Built" drawings (if necessary).
2.3.23 Review invoices and make observations or recommend contractors payment in coordination with Designer and PRIDCO. Proponent shall participate in determining amounts owed to the contractor and suppliers and evaluate the contractor’s Applications and Certificates for Payment (AIA Form G-702 or similar approved by PRIDCO).
2.3.24 Provide construction management files to PRIDCO.
2.3.25 Review contract documents, plans, and permits.
2.3.26 Attend field walks and kick off meetings.
2.3.27 Monitor and enforce construction noticing requirements.
2.3.28 Maintain field diaries (bound workbooks) during construction, including a cumulative record of quantities constructed, daily and weekly reports, working day reports, change order documentation, photographs, and other documentation.
2.3.29 Ensure compliance with the construction contract by continuously monitoring, evaluating, approving, or rejecting the Contactor's work in accordance with the approved construction contract documents.
2.3.30 Determine that the Contractor's work is being performed in accordance with the requirements of the contract documents. Endeavor to guard Owner against defects and deficiencies in the work. As appropriate, require special inspection or testing, or make recommendations to PRIDCO regarding special inspection or testing or work not in accordance with the provisions of the contract document whether such work is fabricated, installed, or completed.
2.3.31 Provide and maintain a digital photographic history of the project(s). Photos will also be taken of the following:
22.214.171.124 Showing existing conditions prior to construction
126.96.36.199 Disputed work items
188.8.131.52 Work that must be duplicated replaced or removed
184.108.40.206 Completed work
220.127.116.11 Extra work
18.104.22.168 Relevant issues
2.3.32 Record the progress of the project. Provide daily inspection reports. Submit written daily progress reports to PRIDCO, including information on contractor(s) and the entire project, showing percentages of completion. Keep daily logs containing a record of weather, contractor's work on site, number of workers, work accomplished, problems encountered, and other relevant data.
2.3.33 During construction, maintain one set of plans to denote field changes or other corrections.
2.3.34 Maintain copies of all permits needed to construct the project and enforce special requirements of each.
2.3.35 Ensure compliance with the State and Federal requirements regarding, but not limited to; Safety, Construction, Labor Standards (Davis-Bacon), Environmental compliance and Bond, SWPPP, etc.
2.3.36 Provide an initial review and one re-submittal of shop drawings and product data for conformance to the construction documents.
2.3.37 If applies, act as the Designated and Acceptance of Works Inspector on OGPe (Government of Puerto Rico Permit Management Office).
2.3.38 At the completion of the construction contract, provide a certification stating that the work has been inspected and has been performed in full compliance with federal laws and regulations and with the construction contract requirements.
2.3.39 Inspector shall prepare, sign, and seal the OGPe or Municipal Permit Office’s inspection certificate, once the project is completed as per drawings and specifications.
2.4 PHASE FOUR: Close-Out Process
2.4.1 Prepare punch-list and provide inspection of punch-list corrective actions.
2.4.2 Administer and direct final inspections, in coordination with PRIDCO’s Administrator or designee.
2.4.3 Assist PRIDCO in determining when the project or a designated portion thereof is substantially complete. Prepare for PRIDCO a summary of the status of the work of the Contractor(s), listing changes in the previously issued Certificates of substantial completion of the work, and recommending the time within which Contractor(s) shall complete uncompleted items on their certificate of substantial completion of the work.
2.4.4 Calculate the amount of final payment due prime Contractor(s).
2.4.5 Obtain evidence of certification of all lien releases.
2.4.6 Assist PRIDCO with filing the project "Notice of Completion".
2.4.7 Secure and transmit to PRIDCO, required bonds and warranties.
2.4.8 Issue the notice of substantial completion and process the Notice of Completion.
2.4.9 Coordinate any startup requirements, if apply.
2.4.10 Deliver all equipment manuals, special equipment, spare parts, catalogs, and other materials required by specifications, if apply.
2.4.11 Collect As-Built data from contractors or design consultants.
2.4.12 Make recommendation for the release of retention.
2.4.13 Prepare and coordinate final documentation for:
22.214.171.124 Partial and Final Payments to Contractors
126.96.36.199 Project Files
188.8.131.52 Request for Information
184.108.40.206 Change Orders
220.127.116.11 PRIDCO Forms
2.4.14 Coordinate and Prepare PRIDCO’s Final Contract Checklist or similar approved by PRIDCO.
18.104.22.168 Owner Acceptance
22.214.171.124.1 Notice of Acceptance
126.96.36.199.2 Final Acceptance Checklist
188.8.131.52 Certification and Approvals (if apply)
184.108.40.206.3 Certificate of Qualified Electrician
220.127.116.11.4 Municipality's Approval
18.104.22.168.5 PR Telecommunication Regulatory Approval
22.214.171.124.6 DTOP's Approval
126.96.36.199.7 Certificate of Final Completion
188.8.131.52.8 Completion, Certification and Notarization of Use Permit (OGPE U-01 Form) (if apply)
184.108.40.206.9 Approved Change Orders
220.127.116.11 Insurance and Guaranties
18.104.22.168.1 Bond and Insurance Company’s Relief
22.214.171.124.2 Installed Mechanic Equipment Extended warranty for 6 months (If apply)
126.96.36.199.3 Materials and equipment warranty.
188.8.131.52.4 Adequate Construction process warranty
184.108.40.206.5 CFE's (Corporación de Fondo del Seguro del Estado) Relief
220.127.116.11.6 Guarantees of Materials and Equipment’s
18.104.22.168.7 Certificates of Installation of Materials and Equipment’s
22.214.171.124.8 Certificate of Payment to Subcontractors and Suppliers (Notarized)
126.96.36.199.9 Evidence of Payment of Municipal's Patents
188.8.131.52 Final Reports (For Permits Closure purposes)
184.108.40.206.1 Plan CES Final Report
220.127.116.11.2 ADS Final Report
18.104.22.168.1 Final Submittal Log
22.214.171.124.2 Final RFI Log
126.96.36.199.3 Final Drawing Log
188.8.131.52.1 PR OSHA 300 Form
184.108.40.206 As Built and Photos
220.127.116.11.1 Photos (3 Original Hard copy and Digital Copy)
18.104.22.168.2 Red Drawings (For As-Built Preparation)
22.214.171.124 PRIDCO Forms
126.96.36.199.1 Material and Equipment's Data Form
188.8.131.52.2 Certificate of Exoneration
2.5 EXISTING CONDITIONS AND HMP ASSESSMENTS, DESIGN & PERMITTING SERVICES TO BE MANAGED:
2.5.1 The Proponent will monitor and managed the services as describe in Exhibit D.
2.5.2 Project regions and Projects:
184.108.40.206 The projects per region are as follow:
(See Exhibit A)
|Total PWs (Projects)|| Category ||Total Damages (DIs) (Properties)||Minimum Damages in a Project per region||Maximum Damages in a Project per region|
220.127.116.11.2 Industrial Parks:
|Region||Total PWs (Projects)|
|Total Damages (DI’s / Properties)|
2.5.3 DESIGN MILESTONES
18.104.22.168 Noted below are the key Design Milestones associated with the Project. Proponent will be required to provide all services necessary to support these milestones:
22.214.171.124.1 Hazard Mitigation Program and Design Development
Existing Conditions and HMP Assessments, and Design Development Deliverables Issued:
DESCRIPTION DURATION RESPONSIBLE FOR
Existing Conditions and HMP Assessments - Site Visits To Be Determined by Proponent Proponent
Existing Conditions and HMP Assessments – Review and Recommendations To Be Determined by Proponent Proponent
PRIDCO’s Approval To Be Determined by Proponent PRIDCO
COR3/FEMA Approval To Be Determined by Proponent COR3/FEMA
Evaluation for the Determination of Substantial Damage in Public Structures Located in Floodplain Areas To Be Determined by Proponent Proponent
Typical Details and Specifications – Review and Recommendations To Be Determined by Proponent Proponent
Drawings To Be Determined by Proponent Proponent
Construction Drawings and Specs (100%) To Be Determined by Proponent Proponent
126.96.36.199.2 Permitting Development
Permitting Development Deliverables Issued:
DESCRIPTION DURATION RESPONSIBLE FOR
Lead and Asbestos Certification To Be Determined by Proponent Proponent
Exclusiones Categoricas (DEC) To Be Determined by Proponent Proponent
ICP Endorsement (Inst. Cult. Puertorriqueña) (SRI) To Be Determined by Proponent Proponent
Recommendations To Be Determined by Proponent Proponent
SHPO To Be Determined by Proponent Proponent
SWPPP, NOI and NOT (If necessary) To Be Determined by Proponent Proponent / Contractor
Others as required by agencies To Be Determined by Proponent TBD
Construction Permits (If necessary) To Be Determined by Proponent Proponent / Contractor
Noted below are the key Construction Milestones associated with the Project. You will be required to provide all services necessary to support these milestones in coordination with the Designer(s):
188.8.131.52 Construction: (For the 1st Project Group per region)
Bid Process Commencement 02/2022
Permit Completion 02/2022
Notice of Award 05/2022
Notice to Proceed 06/2022
Final Inspection 11/2022
Final Completion 11/2022
Project Closeout 12/2022
• Dates are a preliminary estimation and are subject to change in accordance to PRIDCO or Region’s Construction Manager’s Master Schedule.
2.6 OTHER SERVICES REQUESTED:
2.6.1 Proposal shall include the services to be provided during the implementation of the project, Proponent shall consider that it will be providing the following services in compliance with regulations 41 CFR part 60-1.3, 2 CFR part 200, 29 CFR 5 (b) (29 CFR compliance, if applicable).
2.6.2 Proponent shall monitor progress of the work and keep informed off the status of the project. Proponent shall represent the Client in forwarding all instructions to the contractors, consultants, vendors and suppliers.
2.6.3 Proponent shall be present at the project site as required and advise PRIDCO as to the progress and quality of the work, proponent shall keep PRIDCO informed of defects and deficiencies in the work and recommend rejection of work that does not conform to the contract documents.
SECTION 3 - PROPOSAL CONTENT AND FORMAT:
Based on the PRIDCO’s understanding of the scope of services for the project, your written proposal should include at a minimum the following information:
3.1 TRANSMITTAL LETTER
3.1.1 The proposal shall be transmitted with a cover letter describing the Proponent’s interest and commitment to participate in presenting a proposal to be considered to render the services described in the request for proposal. The letter shall state the term for which it will stand and the term. It should clearly state the name, tittle, address, telephone number and e-mail address of the individual presenting the proposal and to whom correspondence should be directed during the Proponent’s selection process. The person presenting the proposal, person with legal capacity and authorized to negotiate with PRIDCO shall be the on presenting and signing this letter and the proposal.
Address the cover letter as follows:
Javier J. Bayón Torres
Puerto Rico Industrial Development Company
P. O. Box 362350
San Juan, PR 00936-2350
3.1.2 Provide a general description of Proponent and any sub-consultants. Must include curriculum vitae or resumes of the personnel to be used.
3.1.3 The Proponent’s Project Staff shall be composed of a minimum of the following:
184.108.40.206 Project Manager – Licensed Professional Engineer (P.E.) (1 per Region)
220.127.116.11 Project Engineer – Engineer In Training (E.I.T.) or P.E. (1 per Region)
18.104.22.168 Project Inspector – E.I.T. or P.E. (3 per Region)
22.214.171.124 Administrative Staff (1 per Region)
3.1.4 Proponent’s understanding of the scope of services required for the project plus any refinements your firm feels are warranted.
3.1.5 Relevant proponents experience including dates of past projects and who on the project team had direct involvement in the project, and illustrative samples. Providing recommendation letters is optional.
3.1.6 Relevant proponent experience shall evidence knowledge of FEMA regulation 428 (Public Assistance Alternative Procedures Guide for Permanent Work), FEMA Hazard Mitigation Grants: 404 and 406, and other applicable regulations.
3.1.7 Provide detail description of proponent’s approach to the project. Proponent shall highlight any innovative ideas it may have to reduce costs or produce a better product.
3.1.8 Proponent’s understanding of the issues which may impact the project schedule or cost.
3.1.9 Proponent’s knowledge and adherence to compliance with the admirative cost principal stated at the 2 CFR 200, all rules and regulations applicable to FEMA’s grant funded projects. Proponents’ acknowledgement that the Federal government has no obligation under this RFP or agreement resulting from it. Proponent shall stat that it will abide by the program fraud and false or fraudulent statements.
3.1.10 Proponents’ knowledge and certification of providing services adhered to what regulation of the 41 CFR Sec. 60-1.3 states.
3.1.11 Proponent’s full name, address and all contact information. Proponents point of contact person, its name and all contact information.
3.1.12 Reports of PRIDCO’s properties assessments shall be sealed by a Licensed Engineer in Puerto Rico.
3.1.13 Any objections or exceptions to requirements in the RFP shall be presented within 7 calendar days of the issue of this document.
3.1.14 References- Provide at least three (3) references (name and current phone numbers) from recent work (previous three (3) years) similar to this project. Include a brief description of each project associated with the reference, and the role of the respective team member.
3.1.15 Proposed fee schedule itemized for each service per Phases. Each proposed fee shall be itemized per hour, er service, with estimate of the time for each of the activities to be performed. The cost per hour shall be a flat fee including travel expenses, computers, software, mobile devices, personal protection equipment as industry requirements and any other tool to provide the service requested. Each region shall be submitted in a separate proposal package complying with all the RFP requirements.
3.2 PROJECT UNDERSTANDING
3.2.1 This section shall clearly communicate the Proponent’s understanding of the nature of work, including coordination with and approvals from PRIDCO.
3.3 APPROACH AND MANAGEMENT PLAN
3.3.1 Provide the firm’s proposed approach and plan for providing the services.
3.4 QUALIFICATIONS AND EXPERIENCE
3.4.1 The proposal shall provide a description of the firm with the type of services offered and a brief history. Provide a description of the organizational structure, including an organizational chart. Provide the qualifications and experience of the consultant(s) that will be available for the project, including the curriculum vitae. Please emphasize the specific qualifications and experience from projects similar to this project.
3.5 ADDITIONAL RELEVANT INFORMATION
3.5.1 Provide additional relevant information that may be helpful in the selection process.
3.6.1 Provide at least three references (name and current phone numbers) from recent work (previous three years) similar to this project. Include a brief description of each project associated with the reference, and the role of the respective team member.
3.7 SUBMITTAL OF PROPOSALS
3.7.1 The proposal shall be printed in single-sided paper size 8.5” x 11”. Two (2) copies and one unbound original and a digital copy via USB or CD, of your proposal are due at PRIDCO offices no later than the time specified in Section 4.1.3, below. Envelopes or packages containing your technical proposal and qualifications shall not include the financial proposal. Separate financial or cost proposal shall be presented. Marketing brochures are not allowed.
3.8 COST PROPOSAL
3.8.1 A cost proposal should be submitted in a separate sealed envelope titled Proponent’s Cost Proposal. The cost proposal shall include the estimated cost by general category. The cost submittal should indicate the number of anticipated hours and the monthly fee for the requested services. In addition, please provide:
126.96.36.199 Hourly rates for each personnel, the named and the service to be provided as described in the RFP.
188.8.131.52 Advise if the hourly fees will be charged for travel time between the Proponent’s main office and the project. These fees shall be considered in the hourly rates for each personnel.
184.108.40.206 Advise if daily travel between the Consultant’s main office and the project will be a reimbursable charge. These fees shall be considered in the hourly rates for each personnel and part of the cost proposal.
220.127.116.11 Travel time, monthly costs for cell phone service and tolls are to be part of the quoted hourly rate and are not reimbursable. No reimbursable disbursement including project related travel such as to Engineer/Architect’s offices will be applicable.
3.9 PROOF OF LIABILITY INSURANCE AND WORK COMPENSATION
3.9.1 Proof of liability insurance and work compensation will be required of the selected Proponent as specified under General Terms and Conditions Section.
3.10 PROJECT SCHEDULE
3.10.1 Provide a preliminary Project schedule that delineates the required phases approach. Illustrate key milestone dates for each phase.
3.11 ADDITIONAL RELEVANT INFORMATION
3.11.1 Provide additional relevant information that may be helpful in the selection process.
3.12 PRIDCO’S RESPONSIBILITIES
3.12.1 PRIDCO will provide selected proponent with access to building plans, conceptual drawings, records, studies, plans and other available documents relating to the project to facilitate the rendering of services.
3.13 GENERAL TERMS AND CONDITIONS:
3.13.1 This is a request for proposal (RFP) and not a call for bids. Accordingly, participation in this process, including the submission of a Proposal, shall not give rise to any liability, contractual or otherwise, on the part of PRIDCO. Similarly, the submission of a Proposal shall not create any obligation on the part of a Proponent to enter into an Agreement.
18.104.22.168 Proposals received later than the specified closing time will be rejected.
22.214.171.124 PRIDCO shall not be liable for any costs incurred by Proponents in the preparation of their proposals. Furthermore, PRIDCO shall not be responsible for any liabilities, cost, loss or damage incurred by any interested party, prior or subsequent to, or by reason of the acceptance, or non-acceptance of the Proposal.
126.96.36.199 PRIDCO reserves the right to accept or reject any or all Proposals.
188.8.131.52 PRIDCO reserves the right to negotiate price and terms with one or more Consultants and no legal obligations will be established until the parties have executed a binding written agreement on mutually agreeable terms and conditions.
184.108.40.206 Consultants shall be registered with General Services Administration of the Commonwealth of Puerto Rico.
3.14 CONFLICT OF INTEREST
3.14.1 By submitting a proposal, the Proponent certifies that:
220.127.116.11 No person either natural or corporate, other than the Proponent, has or will have any interest or share in this Proposal or in the proposed Agreement.
18.104.22.168 There is no collusion or arrangement between the Proponent and any other Proponent (s) in connection with this project.
22.214.171.124 The Proponent has no knowledge of the contents of other Proposals and has made no comparison with any other party in connection with the making of the Proposal.
3.15.1 The Proponent is Not an Employee of PRIDCO. It is understood that the selected Proponent will not be consider in any manner as an employee of PRIDCO, but solely as an independent Consultant. PRIDCO will not, under any circumstances, be liable to the proponents or consultants(s) or any person or persons acting for or under it for any death, injury, or property damage received or claimed, unless such liability arises by virtue of negligence by PRIDCO, their respective officers, agents, or employees.
3.16 INDEMNIFICATION AND HOLD HARMLESS
3.16.1 Proponent shall relieve PRIDCO and other related agencies and public corporations, its directors, officers, employees, agents, representatives, assignees, and the Government of Puerto Rico, from any responsibility and for all loses, causes of action, claims, property and personal damages, liabilities and expenses (including attorney’s fees) arising as a consequence of, or related to negligent actions or fault of the proponent or consultant in the performance of its obligations under this RFP.
3.16.2 Staff hired by the Proponent to carry out its obligations under the resulting Agreement for the services requested by this RFP shall be under the jurisdiction and legal responsibility of the Proponent, who shall assume all of the risks, costs and responsibilities for their actions, supervision, compensation and discounts required by law. If any acts or situation of harm to third parties arise, Proponent expressly relieves PRIDCO and the Government of Puerto Rico from any claim, lawsuit, suit, or proceedings that arises or may arise in relation thereto.
3.16.3 If the Proponent should subcontract all or any portion of the work to be performed under the resultant agreement, the Proponent shall require each Sub-Consultant to indemnify, hold harmless and defend PRIDCO, it’s Board, officers, officials, employees and agents in accordance with the terms of the preceding paragraphs.
3.17 ASSIGNMENT AND SUB-CONTRACTING
3.17.1 It is prohibited to assign or sub-contract the whole or any portion of the Work without PRIDCO’s prior consent in writing. This requirement will be strictly applied and any disregard of it by the Proponent will be treated as a ground for immediate termination of the contract without prejudice to any other remedies and/or indemnifications.
3.18 NON-DISCLOSURE AGREEMENT:
3.18.1 PRIDCO shall provide selected Proponent all documents, reports or materials that Proponent may need and are necessary to render the services object of te resulting Agreement for the services of this RFP, except those in Proponent possession due to its profession.
3.18.2 All the work produced as part of the contracted services, compelled in writing or any other method of conservation by the Proponent shall be privileged and confidential, and may not be reported or revealed to any third party unless previous written consent is released by PRIDCO; neither said work or information must be included as part of the Proponent’s credentials, unless previous written consent is given by the PRIDCO.
3.18.3 All documents, reports, or materials that PRIDCO delivers, or information given to Proponent is strictly confidential, except for documents, reports, material or information that:
126.96.36.199 Is of public domain, or that PRIDCO has authorized its publication or disclosure in writing;
188.8.131.52 Were in legitimate possession of Proponent before PRIDCO disclosed the same and which has no restriction of disclosure
184.108.40.206 Be legitimately reported to the Proponent by a third party, and does not have any restriction on its disclosure; and
220.127.116.11 Have to be reported upon request of law, order or other legal requirements issued by competent authority.
3.18.4 CONSULTANT may not disclose confidential information to third parties and shall only discuss it with PRIDCO’s directors, officers, employees or authorized agents. The services provided under this Agreement are provided so that PRIDCO can exercise the functions and powers assigned to it by its enabling legislation as part of the Executive Branch and, accordingly, management and work by the Proponent under the resulting Agreement, are granted the same privileges, protections and immunities that cover PRIDCO’s efforts, including and without limitations, the Executive Privilege, the Privilege of Deliberative Process and the Attorney-Client Privilege, as they are applicable.
3.18.5 Information concerning the business of PRIDCO which becomes accessible, or known, to the Contractor, its employees or sub-contractors including, but not limited to, financial information, customers, customer lists, business plans, operational plans, data and computer programs, manufacturing processes, engineering/technical data, design process, pricing, research and development, strategic plans, and operating data shall be considered Confidential and Proprietary information of PRIDCO and must not be disclosed to individuals outside of your organization without the prior written approval from PRIDCO.
3.19 INSURANCE REQUIREMENTS
3.19.1 Throughout the life of this resulting Agreement, Proponent acknowledges it shall pay for and maintain in full force and effect, with an insurance company(s) (Company) admitted by the Puerto Rico Insurance Commissioner to do business in the Commonwealth of Puerto Rico, the following policies of insurance:
18.104.22.168 PROFESSIONAL ERRORS AND OMISSIONS, Not less than $500,000 per Occurrence. / $2,000,000 Aggregate. (2 yr. discovery and reporting tail period coverage). Certificate of Insurance only required.
22.214.171.124 COMMERCIAL (BUSINESS) AUTOMOBILE LIABILITY insurance, endorsed for “any auto” with combined single limits of liability of not less than $1,000,000 per occurrence.
126.96.36.199 WORKERS’ COMPENSATION Insurance as required under the Puerto Rico Labor Code, and Employers Liability Insurance with limits not less than $1,000,000 per accident/injury/disease.
188.8.131.52 COMPREHENSIVE GENERAL LIABILITY insurance, $1,000,000 combine single limit. (Including Contractor All Risk Insurance and Third Party Liability Insurance).
3.20 ADDITIONAL CONDITIONS:
3.20.1 Any Advisor, Consultant or Professional who drafted, or assisted PRIDCO in the preparation, identification or provided assessment related to the specification for the Project object of this RFP; will be excluded from participation in the Construction Phase as bidders or related personnel.
3.20.2 Specifications on this RFP are not describing a specific brand or firm that will be part of the design and specifications in the Project. No specific product by brand is requested though the life of the services herein requested. Nonetheless, materials shall comply with all federal and industry requirements. When during the process, it is not possible to create specifications that adequately describe the product, "similar to" or "equivalent to" shall be used. None of our specifications for services are limiting the open competition.
3.20.3 The Proponent shall be registered in the System for Award Management (SAM) as required to receive funds from the US federal government. The Proponent shall provide evidence of compliance with this Federal requirement and be in good standing (no active exclusions and debts).
SECTION 4 – SUBMISSION REQUIREMENTS:
Based on the PRIDCO’s understanding of the scope of services for the project, your written proposal should include at a minimum the following information:
4.1 SUBMISSION DEADLINE
4.1.1 Consultants are to prepare and submit their Proposal in response to this RFP in 2 parts identified as:
Part 1 – Technical Requirements
Part 2 – Consultant Cost Proposal
Each of two parts of the Proposal requires a separate sealed envelope, clearly identifying one envelope as “Part 1 – Technical Requirements” and the other envelope as “Part 2 - Consultant Cost Proposal”.
4.1.2 The two envelopes are to be submitted at the same time. Proposals that are faxed or e-mailed will be rejected.
4.1.3 Proposals shall be submitted before:
4:00 PM local time, Thursday, November 4, 2021, to:
Mrs. Maria Diaz
PRIDCO Main Office Suite 303
355 F.D. Roosevelt Ave.
4.2 MODIFICATION OR WITHDRAWAL OF PROPOSAL
4.2.1 A proposal that is in possession of PRIDCO may be withdrawn or altered by letter with the signature and name of the person authorized for submitting if it is received prior to the time and date of opening.
4.3 ERRORS IN PROPOSALS
4.3.1 The Consultants are responsible for errors and omissions on their proposals and any such errors and omissions will not reduce their obligation to PRIDCO.
4.4 RIGHT OF REJECTION
4.4.1 PRIDCO and the Government of Puerto Rico reserves the right to cancel the RFP process at any moment for local or federal government convenience or due to funds availability.
4.5 PRODUCT OWNERSHIP
4.5.1 Any documents, drawings or reports as well as the intellectual services resulting from any contract will be property of PRIDCO. All drawings documents, all construction specifications, and any other documents shall be delivered in hard copy, compact disc (CD), USB or cloud access. According to the documents in questions the documents shall be editable AutoCAD format (.dwg) or editable MS Word format (.doc).
4.6 LICENSING REQUIREMENTS
4.6.1 Any professional or business licenses required to render the requested services, if selected, will be at the sole cost and responsibility of the Proponent. Proponent shall include all professional licenses, Board memberships and any other required by its profession for the required services under this RFP.
4.7 PROPOSAL DEVELOPMENT COSTS
4.7.1 The cost of preparing and submitting a proposal is the sole responsibility of the proponent and shall not be chargeable in any manner to the PRIDCO.
4.8 ADDITIONAL INFORMATION
4.8.1 PRIDCO’s contact person will be:
Santiago R. García Meléndez, PE
PRIDCO’s Project Manager
Executive Director Office
SECTION 5 – SELECTION OF CONSULTANT:
5.1 PROPOSAL EVALUATION CRITERIA AND PROCEDURES
5.1.1 Evaluation Criteria
Proposal will be received by Mrs. Maria Diaz from PRIDCO’s Properties Management Office, Room 303, on November 4, 2021, no later than 4:00 pm.
An evaluation committee, comprised of PRIDCO’s members, will review, and evaluate technical proposals against the following criteria:
184.108.40.206 Understanding of PRIDCO’s Goals: Does the Proponent understand the Project parameters?
220.127.116.11 Staff: Do qualifications of key personnel assigned to the Project coincide with Project’s requirements? Do assigned personnel have all required education, experience, and professional qualifications? Do assigned personnel have relevant experience complying with Public Policy for Federal and State projects?
18.104.22.168 Specific Management Approach: How does the Proponent intend to achieve the PRIDCO’s budget and time goals for the Project? How will the Proponent apply its management techniques and resources? Discuss such factors as:
22.214.171.124.1 Project management and team organization
126.96.36.199.2 Quality control
188.8.131.52.3 Schedule control
184.108.40.206.4 Budget control (experience of cost estimator)
220.127.116.11.5 Relations with sub-consultants
18.104.22.168 Experience: Proponent’s demonstrated the ability to successfully provide services for projects of a similar complexity and size. Does the Proponent have experience with public services projects?
22.214.171.124 Organization: Are the qualifications of the Proponent’s personnel suitable for the Project; and does the Proponent’s organizational structure show sufficient depth for its present workload?
126.96.36.199 Reputation: Are the Proponent’s references from past clients and associates favorable; and does the Proponent show financial and operational stability?
188.8.131.52 Services Offered: Does Proponent offer the breadth and quality of services required for the Project?
184.108.40.206 Pre-Construction Bid Services: Does Proponent have ability to provide pre-construction bidding services, including estimating, scheduling, constructability review, bidding strategies, and value engineering?
220.127.116.11 Relevant Management & Permitting Experience
18.104.22.168 Financial capability to guarantee negotiated cost and bear expenses above that cost.
5.1.2 Consultant Selection Procedures
22.214.171.124 At completion of the proposal review process, Proponents will be ranked, and the three (3) most highly qualified Proponents will conform a “short list” per region. The short list will be integrated by the best qualified proponents. Price will be considered but will not constitute the sole item to be considered nor will it grant automatic selection of a Proponent.
126.96.36.199 Proponents on the short list will be asked to formally present their proposal to PRIDCO, and respond to interviewer questions. Following presentation/interviews, the evaluation committee will complete its ranking. Final selection will be made based on a combination of qualifications and cost, with the emphasis on qualifications. PRIDCO is not looking for the lowest bidder, rather a business partner. The evaluation committee will make a recommendation to the PRIDCO’s Board for final decision. The presentation and interview session will not exceed one hour per Proponent.
188.8.131.52 After thorough evaluation by Committee, all proponents that submitted proposals will be notified of the awarded proponents, according to the schedule below.
184.108.40.206 Following successful negotiations with the selected Proponent, a contract will be drafted and then referred to the PRIDCO’s Board for final approval.
SECTION 6 – SCHEDULE:
PRIDCO believes the Proponent selection schedule will be as follows:
6.1 RFP Issued: Thursday, September 30, 2021 (To accessed the document electronically please access: http://www.pridco.pr.gov/real-estate/Pages/ConstructionManagementAndInspection.aspx )
6.2 Virtual Project Scope Presentation (Mandatory): Thursday, October 14, 2021, at 10:00 A.M. The Project Scope Presentation will be held virtually via Microsoft Team. (To join the meeting please access the following link: https://qrco.de/bcQX6w) Attendance to the Virtual Project Scope Presentation is Mandatory.
6.3 Questions Due: Thursday, October 21, 2021, no later than 4:00 pm
6.4 Response to Questions/Answers Sent: Thursday, October 28, 2021, no later than 4:00 pm
6.5 Proposals due: Thursday, November 4, 2021, no later than 4:00 pm at PRIDCO’s Properties Management Office, 355 F.D. Roosevelt Avenue, Room 303, Hato Rey PR 00918
6.6 Selection/Short-list: Thursday, November 11, 2021
6.7 Consultant Short-list Interviews: Tuesday, November 16, 2021, and Wednesday, November 17, 2021
6.8 Revised Proposals: Friday, November 19, 2021, no later than 4:00 pm
6.9 Recommendation for Selection will be: Tuesday, November 30, 2021
SECTION 7 – QUESTIONS:
7.1 Questions must be delivered by electronic mail. All requests for interpretation shall be brought to the attention of PRIDCO in writing no later than Question Due date, indicated above. Questions should be addressed to:
Santiago R. García Meléndez, PE
Executive Director Office
7.2 No clarifications requests will be accepted by telephone. Responses to clarifications requests and changes to the RFP required before the submission closing will be issued in the forms of a written Addendum and sent by email. PRIDCO will assume no responsibility for oral instructions or suggestions.
SECTION 8 – EXHIBITS:
8.1 EXHIBIT A - PRIDCO'S INDUSTRIAL BUILDINGS (CATEGORY E)
8.2 EXHIBIT B - PRIDCO'S INDUSTRIAL PARKS (CATEGORY C)
8.3 EXHIBIT C - PRIDCO REGIONS AND DAMAGES BY TYPE OF BUILDING
8.4 EXHIBIT D – RPF Mitigation, Design and Permitting
8.5 EXHIBIT E - HUD PROVISIONS
8.6 EXHIBIT F - Reglamento 9230 – ASG REGULATION
8.7 EXHIBIT G - FEMA PUBLIC ASSISTANCE PROGRAM AND POLICY GUIDE V4 20200601